Taking rides to a newer level
VE UK Blog

Return to Blogs

Malossi Vespa PX200 VR-One Reed Valve Crankcases

Malossi announced their new reed valve crankcases for the Vespa PX 200 at Eicma, Milan in 2018, These are now available from VE (UK). The Malossi VR-One MHR (VM577230) crankcase, which has been manufactured in Italy, provides the ideal foundation for your next performance reed valve engine. This high quality crankcase has been designed to withstand increased power with reinforcing webbing in key locations and is supplied with main bearings for the flywheel side (Ø25xØ52×15) and for the drive side (Ø25xØ62×12) which both use balls instead of rollers, which offer greater radial load tolerance capacity and an additional resistance to axial loads, which is not possible with the original roller bearings. Dedicated seals are also supplied. The transfer ports have been machined to “match” the range of Malossi PX200 cylinder kits, saving both time and money on porting work. Supplied with a reed valve manifold suitable for carburettors up to 30mm in size which has been designed for a much larger reed block (included) that is equivalent in size to a 6 petal block. Gone are the M7 bolts securing the crankcase halves together, and in their place M8 allen bolts now feature. Malossi have also redesigned the mating face to remove the need for a central gasket, (sometimes a cause of problems on high power motors), allowing the use of a gasket sealant in its place. The crankcase is supplied with engine mounting rubbers, cylinder studs, crankcase bolts, drain plugs and washers, reed valve inlet manifold, crank bearings and oil seals. With Malossi’s heritage in Vespa tuning, the new crankcases are sure to be a very popular starting point for performance engine builders looking for excellent reliability, with an outstanding quality of finish. In addition to VE’s highly competitive “Flat Rate” items VE have revised prices across many thousands of Malossi parts to ensure you get the best deal. See for yourself at: www.ve-uk.com VE (UK) are the official Factory Appointed Sole UK Importer for Malossi Performance Products. VE (UK) stocks the full range for both classic and automatic scooter models. To browse the complete range of Malossi Performance Products available from VE (UK), visit www.ve-uk.com/malossi You can now order online at www.ve-uk.com]]>

SIP "Vape" Ignition Kits for Classic Vespa
read the previous post
Malossi Gear Kit For Vespa GTS/Primavera/Sprint 125 iGet
read the next post