Cick here to return to Search Results
Please DO NOT USE THE BACK BUTTON if you wish to view your previous search results. Please use the link above.
23 TOOTH CLUTCH DRIVE GEAR – STANDARD ON P200E-PX200E
£32.80 (including VAT)
VE11107-23 Clutch drive gears with a 108mm backing plate for use in the old 7 spring clutches - 23 Tooth. These drive gears are available in 20 tooth as fitted to T5 models, 21 tooth as fitted to Cosa 200 mark 1 models, 22 tooth as fitted to the Rally 180, and 23 tooth as fitted to P200E-PX200E models. Changing the drive gear tooth count can raise or lower the overall gearing, (less teeth will lower the gearing, more teeth will increase the gearing) and is really easy to do as only the clutch needs removing from the motor, ideal if you are tuning your motor or pulling a side car. This drive gear is 23 tooth, and it has 26 teeth where the clutch steel plates fit, it is 32mm tall and the backing plate is 108mm, this will mate with a 65 tooth drive gear. Equivalent to Piaggio Vespa number 130823. Fitment VESPA 200 - P200E 1978-1981 VESPA 200 - PX200E 1981-1984 VESPA 200 - PX200EFL 1984-1997 VESPA 200 RALLY
Fitment Chart
| VESPA | VESPA 200 - P200E 1978-1981 | 23 TOOTH CLUTCH DRIVE GEAR - STANDARD ON P200E-PX200E |
| VESPA | VESPA 200 - PX200E 1981-1984 | 23 TOOTH CLUTCH DRIVE GEAR - STANDARD ON P200E-PX200E |
| VESPA | VESPA 200 - PX200EFL 1984-1997 | 23 TOOTH CLUTCH DRIVE GEAR - STANDARD ON P200E-PX200E |
| VESPA | VESPA 200 RALLY | 23 TOOTH CLUTCH DRIVE GEAR - STANDARD ON P200E-PX200E |
