Cick here to return to Search Results
Please DO NOT USE THE BACK BUTTON if you wish to view your previous search results. Please use the link above.
MALOSSI FORCEMASTER 3 ECU for EURO 4 + 5 MODELS
£339.95 (including VAT)
VM559335 MALOSSI FORCE MASTER 3 ECU. Suitable for any Euro 4 or Euro 5 HPE motor, with Standard or Malossi cylinder, Standard or Sports exhaust. Completely removes speed limitier and adds an extra 1000 rpm before the rev limiter cuts in. LIMITLESS Have you heard of the theory that argues we use only twenty per cent of our brain? With Force Master 3 you'll use a hundred per cent... of your engine! To improve our most advance control module, we designed with vision, starting with the milestones achieved so far. Thus was conceived Force Master 3, a futuristic control module both in hardware and in software. LAMBDA MODULATOR The original control module of the scooter, for analysis of the air/fuel ratio and to adjust the carburetion accordingly, normally interfaces with the lambda sensor installed on the silencer. Force Master 3 intercepts the signal of the original sensor, sending to the primary control module the values produced by a virtual lambda and allowing dynamic and customised management of the air/fuel ratio in all the moments for which the original system would be programmed to analyse the results of the lamba sensor.It has finally becomes possible to manage the air/fuel ratio of the carburetion between the idle and transmission zones, essentially for all those rpm and for those conditions in which control of the operations of the lambda might prevent intervention. Thanks to a highly evolved circuit, the electrical disturbances normally present on the throttle position signal are removed in such a way as to allow more precise identification of its real degree of opening and significantly improving response times, all to the advantage of the performance and efficiency of the engine. HARDWARE AND INTERFACE Accompanying a hardware, there therefore needs to be a microprocessor with very high computing power thatwould enable the Malossi technicians to introduce new software strategies and to take advantage of all the ForceMaster 3 potentials. .Cross reference Malossi 5519335 (was 5518992 also 5518480). Fitment VESPA GTS HPE 300 2019-2020 Euro 4 - VESPA GTS HPE 300 2021 on Euro 5.
Fitment Chart
| VESPA AUTO | VESPA GTS HPE 300 2019-2020 Euro 4 | MALOSSI FORCEMASTER 3 ECU for EURO 4 + 5 MODELS |
| VESPA AUTO | VESPA GTS HPE 300 2019-2020 Euro 4 | MALOSSI FORCEMASTER 3 ECU for EURO 4 + 5 MODELS |
| VESPA AUTO | VESPA GTS HPE 300 2021 on Euro 5 | MALOSSI FORCEMASTER 3 ECU for EURO 4 + 5 MODELS |
| VESPA AUTO | VESPA GTS HPE 300 2021 on Euro 5 | MALOSSI FORCEMASTER 3 ECU for EURO 4 + 5 MODELS |
