Cick here to return to Search Results
Please DO NOT USE THE BACK BUTTON if you wish to view your previous search results. Please use the link above.
SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD
£354.00 (including VAT)
VE10551-P127 Sip Performance Bell shaped crank - P200, Special version with 127mm Con rod for Quattrini cylinders. These bell shape cranks are exclusivly for motors modified to reed valve inlet, the offer very good balance and low vibration, available in Standard or Performance versions the latter having an upgraded forged and polished con rod. Con Rod length is 127mm and the stroke is 62mm (5mm longer than standard), so will require packers to adjust the barrel length to suit. Installation of these crankshafts Most versions of the Sip Bell cranks are equipped with longer stroke, and will require that the crankcase is machined to allow a minimum of 1mm clearance for the big end. Before the engine cases are machined always check that there is enough material available for the modification. On Largeframe engines it is usually sufficient to machine the flywheel side of the crankcase open slightly and only remove the disc-valve sealing material in the larger half.
Fitment Chart
| VESPA | VESPA 200 - P200E 1978-1981 | SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD |
| VESPA | VESPA 200 - PX200E 1981-1984 | SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD |
| VESPA | VESPA 200 - PX200E DISC 1998 ON | SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD |
| VESPA | VESPA 200 - PX200EFL 1984-1997 | SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD |
| VESPA | VESPA 200 COSA | SIP PERFORMANCE BELL SHAPED CRANK WITH 62mm STROKE and 127mm CON ROD |
